The large 7" colour TFT touch LCD offers intuitive operation of functions, settings, and various operational visual aids such as dual spectrum scope aligned vertically or horizontally, simulated analogue meters and RTTY, PSK31/63 mode decoded messages. This is ideal when strong signals are received in a contest pile-up or from broadcast stations on adjacent frequencies or bands. Additionally the third and higher order IMD components are reduced. The DIGI-SEL preselectors are RF filters with sharp, narrow passband characteristics preventing Analogue-to-Digital Converter overflow from large out-of-band signals when sampling the RF signals. Two separate DIGI-SEL preselectors, two separate Band Pass Filter networks, feed two separate A/D converters into the FPGA. Whether listening to both sides of DX station running split, or looking for a multiplier on a different band or mode, the dual receivers in the IC-7610 have you covered. * Representative value at 2 kHz frequency separation (Received frequency: 14.2 MHz, Mode: CW, IF BW: 500 Hz) There is a difference you can actually hear as the desired signal comes out of the pileup! This performance gives you the ability to pull weak signals out of the noise of strong adjacent signals.
The RF Direct Sampling System in the IC-7610 is capable of 110 dB* RMDR. This process reduces distortion that naturally occurs in the various mixer stages found in traditional superhetrodyne receivers. The IC-7610 employs an RF direct sampling system, where RF signals directly convert to digital data and then processed by the FPGA (Field-Programmable Gate Array). The IC-7610 also comes with a high-speed, high-resolution, real-time spectrum scope on a 7-inch color display. Achieving 100dB RMDR, these receivers rival that of other top-of-the-line transceivers. The IC-7610 introduces dual RF direct sampling receivers. The high performance RMDR in the IC-7610 has the ability to pick out the faintest of signals even in the presence of stronger, adjacent signals. The difference between putting the QSO in the log or trying another time is the capability of your receiver. AGC control is separately possible.īNC connectors have been adopted on the rear RX ANT IN / OUT and transverter terminalsįaint signals are no longer a challenge for DXers and Contesters around the world, with the new IC-7610. Also, "diversity reception" can be also used in which the same frequency is received by different antennas. You can listen to the main and sub with one antenna, and you can also divide the used antenna between the main and sub.
#Icom ic 7610 vs ic 7800 Pc#
The front panel has two USB ports (for optional USB PC keyboards and USB cards). The 7 inch diagonal wide color TFT LCD, 800x480 pixel display is dazzling. There is even a built-in digital voice recorder and voice synthesizer.
#Icom ic 7610 vs ic 7800 full#
The newly designed push-pull MOS-FET amplifiers work with 48VDC, providing a powerful 200W of output power at full duty cycle with low IMD in all bands. There is an automatic tracking preselector to reject out-of-band interference. You will enjoy a +40dBm 3rd order intercept point and ultra wide dynamic range. Two independent DSP units (of the same type used in the famous IC-7800) are built in: one for the transmitter & receiver and one for the spectrum display. It employs the latest technology to give you the competitive edge.
The ICOM IC-7700 was designed from the start to be the ultimate contest transceiver.
0 kommentar(er)
